Engineered and Built in the USA
349-15
Categories: 349-Series, Time-Delay-RelaysThe Model 349 Series Override Timers are one-shot timers designed as lighting control timers or override controls for energy management applications. The timers are designed to operate from either 24 or 120 VAC and mount in a standard wall switch box. Wire leads allow connections to be made with wire nuts. The Model 349-2 is a 2-hour timer adjustable from 5 minutes to 2 hours. Pressing the start button pulls in the internal relay. After the delay, the relay drops out. pressing the button again during the delay period will restart the timer. An indicator light shows when the relay is pulled in. The Model 349-5 has a maximum delay of 75 minutes in 5 minute increments. The Model 349-15 has a maximum delay of 15 hours, in 1 hour increments. The 349-15 can also be set to 15 minute increments (3 hours maximum delay). On both models (349-5 and 349-15), after the start button is pressed, the internal relay pulls in for one timing increment. Each additional press of the button adds one timing increment to the time, up to 15 increments total. The 16th press of the button drops out the relay. Binary numbered indicator lights show remaining time.
If Octopart does not currently display the Time Mark product you desire, please call us Toll-Free at (800) 862-2875 or use the Find a Distributor link on our website to find a distributor near you.
Additional Information
| Contacts | SPDT |
|---|---|
| Mount | Wall Switch Box |
| Timing Range | 15 Steps: 15 Min. or 1 Hr. Increments |
| Timer Function | Series Override Timer |
| Voltage Range | 24/120VAC |
Related Products
-
310-120
Programmable Timer4 ranges (0.15 Sec. - 64 Min.)Select optionsThe Model 310 Programmable Timer is a universal timer designed to replace over 20 standard timers. Each Model 310 can be set for one of five functions in four timing ranges, and is available in three voltage ranges. The digital design of the Model 310 provides high accuracy repeatability and response time. The heavy-duty output relay carries loads up to 10 amps at up to 240 volts AC, resistive. Programming is accomplished by simply installing jumper wires between two or more socket pins. An LED indictor illuminates when the relay is energized.
-
310-24
Programmable Timer4 ranges (0.15 Sec. - 64 Min.)Select optionsThe Model 310 Programmable Timer is a universal timer designed to replace over 20 standard timers. Each Model 310 can be set for one of five functions in four timing ranges, and is available in three voltage ranges. The digital design of the Model 310 provides high accuracy repeatability and response time. The heavy-duty output relay carries loads up to 10 amps at up to 240 volts AC, resistive. Programming is accomplished by simply installing jumper wires between two or more socket pins. An LED indictor illuminates when the relay is energized.
-
303-H
On Delay/Interval Timer8 ranges (1-900 Sec.)Select optionsThe Model 303 can operate in 2 different timing modes: In the On Delay Mode: When power is applied to the coil, the timer will delay for the preset time before energizing the relay. The relay will remain energized as long as power is applied. Power must be removed to reset the timer. In the Interval Mode: When power is applied to the coil, the relay will energize immediately and remain energized for the preset time period. At the end of the time period, the relay will de-energize and remain de-energized until power is removed from the coil. Removing and re-applying power will restart the timer, energizing the relay. An SG version of this model is available using silver with gold flash contacts.
The Model 303 is UL Recognized and CSA Certified.
-
330-H-300SEC
Operate Delay Timer1 - 300 Sec.Select optionsThe Models 330 and 360 Operate Delay Timers are designed for a wide range of industrial applications. Examples include automatic and machine tool control circuits, HVAC circuits, and warm-up delay circuits. The Model 330 is a DPDT potentiometer (knob-adjust) timer. The Model 360 is a DPDT, high-accuracy digital input timer. Solid-state timing circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a variety of voltage and timing ranges to cover all possible applications. An SG version of this model is available using silver with gold flash contacts. Models 330 and 360 are UL Recognized and CSA Certified.