553-05

Categories: ,

The Model 553-05 Re-Acceleration Relay is designed to take the place of a voltage sensing relay and two time delay relays. When voltage is applied to the Model 553-05, and the external start switch is closed, the adjustable on-delay time begins. After the delay period, the contacts will close. If the line voltage drops below 90 volts, the contacts open and the true-off delay begins. If the voltage rises above 102 volts before the true-off delay has elapsed, the contact will re-close. If voltage is not restored to 102 volts before the true-off delay time period ends, the contacts will remain open until the external start switch is closed.

Clear
Download Datasheet
Buy Online
 
Time Mark products are only sold through authorized Time Mark distributors. The "Buy Online" button will open a new browser window on Octopart.com and display Time Mark distributors that sell your desired product.

If Octopart does not currently display the Time Mark product you desire, please call us Toll-Free at (800) 862-2875 or use the Find a Distributor link on our website to find a distributor near you.

Additional Information

Mount

8-Pin
Timing Range

On delay: 5-300 Sec. Off delay: 1-10 Sec.
Timer Function

Re-Acceleration Relay
Voltage Range

120VAC

Related Products

  • 310-24

    Programmable Timer
    4 ranges (0.15 Sec. - 64 Min.)

    The Model 310 Programmable Timer is a universal timer designed to replace over 20 standard timers. Each Model 310 can be set for one of five functions in four timing ranges, and is available in three voltage ranges. The digital design of the Model 310 provides high accuracy repeatability and response time. The heavy-duty output relay carries loads up to 10 amps at up to 240 volts AC, resistive. Programming is accomplished by simply installing jumper wires between two or more socket pins. An LED indictor illuminates when the relay is energized.

    Select options

  • 553-02

    Re-Acceleration Relay

    The Model 553-02 Re-Acceleration Relay is designed to take the place of a voltage sensing relay and two time delay relays. When voltage is applied to the Model 553-02, and the external start switch is closed, the adjustable on-delay time begins. After the delay period, the contacts will close. If the line voltage drops below 90 volts, the contacts open and the true-off delay begins. If the voltage rises above 102 volts before the true-off delay has elapsed, the contact will re-close. If voltage is not restored to 102 volts before the true-off delay time period ends, the contacts will remain open until the external start switch is closed.

    Select options

  • 303-H

    On Delay/Interval Timer
    8 ranges (1-900 Sec.)

    The Model 303 can operate in 2 different timing modes: In the On Delay Mode: When power is applied to the coil, the timer will delay for the preset time before energizing the relay. The relay will remain energized as long as power is applied. Power must be removed to reset the timer. In the Interval Mode: When power is applied to the coil, the relay will energize immediately and remain energized for the preset time period. At the end of the time period, the relay will de-energize and remain de-energized until power is removed from the coil. Removing and re-applying power will restart the timer, energizing the relay. An SG version of this model is available using silver with gold flash contacts.

    The Model 303 is UL Recognized and CSA Certified.

    Select options

  • 300-H

    Programmable Timer
    0.15 Sec. - 64 Min.

    The Model 300 Programmable Timer is designed to replace over 100 standard timers. One Model 300 can be set for one of five functions, covers four timing ranges, and has a power supply for any AC/DC voltage from 10 to 28 Volts or 40 to 260 Volts. An SG version of this model is available using silver with gold flash contacts. The digital design of the Model 300 provides high accuracy, repeatability and response time. The output of the Model 300 is a heavy-duty SPDT electro-mechanical output relay. Programming options are chosen by simply setting the four DIP switches on top of the relay, and then adjusting a potentiometer for percent of delay. A LED indicator illuminates when the relay is energized. The Model 300 can be set to Delay-on-Release by adding an external jumper between pins 6 and 8 (see Installation Instructions on product data sheet for more details).

    The Model 300 is UL Recognized and CSA Certified.

    Select options