Products

Showing 417–432 of 655 results

• 

  365-L-1SEC

  Retriggerable One-Shot
  1-1023 Sec.
  Read more
  The Model 335 and 365 Retriggerable One-Shot Timers are functionally interchangeable. The Model 335 is a DPDT potentiometer (knob-adjust) timer while the Model 365 is a DPDT, high-accuracy digital input timer. Solidstate timing circuits in each model drive an internal electromechanical relay. With power applied to the coil, when the initiate switch (dry contact) is closed, the relay will energize for the time period set by the user. At the end of the preset time period, the relay will de-energize. If the initiate switch opens and then closes multiple times while the relay is energized (i. e. it is retriggered), the relay will then restart the delay time. The relay will remain energized until the retriggering stops and the delay time ends. When power is removed, the relay will de-energize. An SG version of this model is available using silver with gold flash contacts.

  Models 335 and 365 are UL Recognized and CSA Certified.
• 

  368-H-0.1SEC

  Recycle Timer – Off First
  0.1-102.3 Sec.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  368-H-1HR

  Recycle Timer – Off First
  1-1023 Hr.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  368-H-1MIN

  Recycle Timer – Off First
  1-1023 Min.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  368-H-1SEC

  Recycle Timer – Off First
  1-1023 Sec.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  368-L-0.1SEC

  Recycle Timer – Off First
  0.1-102.3 Sec.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  368-L-1HR

  Recycle Timer – Off First
  1-1023 Hr.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  368-L-1MIN

  Recycle Timer – Off First
  1-1023 Min.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  368-L-1SEC

  Recycle Timer – Off First
  1-1023 Sec.
  Read more
  The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 338 is a DPDT potentiometer (knob-adjust). The Model 368 is a DPDT, high-accuracy digital input timer. Solid-state circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 338 and 368 are UL Recognized and CSA Certified.
• 

  386

  Countdown Timer
  Treatment Timer
  Read more
  The Model 386 Count Down Timer is a timer with an audible alarm output. It is housed in a standard wall switch enclosure for easy, permanent installation. The Model 386 timer was designed as a “treatment timer” and is useful in areas requiring an audible alarm at the end of a treatment, such as a tanning bed.The Model 386 is knob-adjustable from 1 to 60 minutes. There is a user replaceable 9V battery inside and should provide one to six months of operation. The previous set time is remembered each time the battery is changed as well as when the timer wakes up; this allows for easy repeatable timing without the need to adjust the knob. There are two LEDs; the upper one is the timing/timed out, and the lower one symbolizes “set mode” and low battery information. Note: To change the time, press and hold the button until the lower LED begins flashing green, when finished, press the button again to “lock-in” and store the value.
• 

  388-H-0.1SEC

  Recycle Timer – On First
  0.1-102.3 Sec.
  Read more
  The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 358 and 388 are UL Recognized and CSA Certified.
• 

  388-H-1HR

  Recycle Timer – On First
  1-1023 Hr.
  Read more
  The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 358 and 388 are UL Recognized and CSA Certified.
• 

  388-H-1MIN

  Recycle Timer – On First
  1-1023 Min.
  Read more
  The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 358 and 388 are UL Recognized and CSA Certified.
• 

  388-H-1SEC

  Recycle Timer – On First
  1-1023 Sec.
  Read more
  The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 358 and 388 are UL Recognized and CSA Certified.
• 

  388-L-0.1SEC

  Recycle Timer – On First
  0.1-102.3 Sec.
  Read more
  The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 358 and 388 are UL Recognized and CSA Certified.
• 

  388-L-1HR

  Recycle Timer – On First
  1-1023 Hr.
  Read more
  The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

  Models 358 and 388 are UL Recognized and CSA Certified.