Engineered and Built in the USA
(800) 862-2875
> Accessories
Accessories
Showing 1–16 of 26 resultsSorted by latest
-
2480
Overvoltage on your incoming power lines can increase the temperature and reduce the life span of your equipment. The Model 2480 Voltage Extender is used to increase the usable voltage range on Time MarkÕs 480 volt three phase monitors up to 528VAC (Models A257B, A258B or 19-480). The Model 2480 has quick-connect tabs for easy connections to the incoming 3-phases and the output relay terminals as well as a built in 8-pin octal socket for the phase monitor. The 2480 can be surface mounted or DIN rail mounted. -
SS-575
Time Mark’s Smart Socket is the first socket which will allow monitoring of voltages up to 635 VAC with a socket-mounted Time Mark phase loss relay. The appropriate relay will allow monitoring for phase loss, phase reversal, low voltage and high voltage conditions. A key safety feature of the Smart Socket is it will not allow the voltage potential at the pin connections to rise to the full input voltage when the relay is removed. Two versions for the Smart Socket are available: one for 480 VAC and one for 575 VAC applications. The Smart Socket is designed to be used only with the Models B246, 253, 257B and 258B. Each of these relays is covered by Time Mark’s exclusive 5-Year Unconditional Warranty (Note: This product was previously designated as Model 98A544). -
SS-480
Time Mark’s Smart Socket is the first socket which will allow monitoring of voltages up to 635 VAC with a socket-mounted Time Mark phase loss relay. The appropriate relay will allow monitoring for phase loss, phase reversal, low voltage and high voltage conditions. A key safety feature of the Smart Socket is it will not allow the voltage potential at the pin connections to rise to the full input voltage when the relay is removed. Two versions for the Smart Socket are available: one for 480 VAC and one for 575 VAC applications. The Smart Socket is designed to be used only with the Models B246, 253, 257B and 258B. Each of these relays is covered by Time Mark’s exclusive 5-Year Unconditional Warranty (Note: This product was previously designated as Model 98A544). -
ENCDIN-11PIN
The ENCDIN series of safety enclosures were designed to provide external protection for 8-Pin and 11-Pin socket-mounted devices such as: 3-Phase Monitors, Voltage Monitors, Current Monitors, Alternating Relays, Time Delay Relays, Liquid Level Controls, Transducers and Power Supplies.
Each enclosure is made of 20 gauge steel with a dark gray powder coat finish. A standard 35mm DIN rail is attached inside with Time Mark’s 11-pin socket (rated 10A @ 300VAC) mounted to the DIN rail. Half-inch and three-quarter inch conduit knockouts are provided on three sides. The door is hinged to allow easy mounting and access. -
ENCDIN-8PIN-2
The ENCDIN series of safety enclosures were designed to provide external protection for 8-Pin and 11-Pin socket-mounted devices such as: 3-Phase Monitors, Voltage Monitors, Current Monitors, Alternating Relays, Time Delay Relays, Liquid Level Controls, Transducers and Power Supplies.
Each enclosure is made of 20 gauge steel with a dark gray powder coat finish. A standard 35mm DIN rail is attached inside with two of Time Mark’s 8-pin sockets (rated 10A @ 600VAC) mounted to the DIN rail. Half-inch and three-quarter inch conduit knockouts are provided on three sides. The door is hinged to allow easy mounting and access. -
ENCDIN-8PIN
The ENCDIN series of safety enclosures were designed to provide external protection for 8-Pin and 11-Pin socket-mounted devices such as: 3-Phase Monitors, Voltage Monitors, Current Monitors, Alternating Relays, Time Delay Relays, Liquid Level Controls, Transducers and Power Supplies.
Each enclosure is made of 20 gauge steel with a dark gray powder coat finish. A standard 35mm DIN rail is attached inside with Time Mark’s 8-pin socket (rated 10A @ 600VAC) mounted to the DIN rail. Half-inch and three-quarter inch conduit knockouts are provided on three sides. The door is hinged to allow easy mounting and access. -
ENCDIN
The ENCDIN series of safety enclosures were designed to provide external protection for 8-Pin and 11-Pin socket-mounted devices such as: 3-Phase Monitors, Voltage Monitors, Current Monitors, Alternating Relays, Time Delay Relays, Liquid Level Controls, Transducers and Power Supplies.
Each enclosure is made of 20 gauge steel with a dark gray powder coat finish. A standard 35mm DIN rail is attached inside and half-inch and three-quarter inch conduit knockouts are provided on three sides. The door is hinged to allow easy mounting and access. -
HDC-1
The Hold Down Clamp is constructed of stainless steel brackets and is joined with a rubber O-ring. The clamp is designed to secure the socket-mounted relay against vibration. The Hold Down Clamp is attached to the socket with existing mounting hardware. These clamps are made to fit all Time Mark and Signaline socket-mounted relays (Note: This product was previously designated as Model 98A535). -
DRA-1
The DRA-1 DIN Rail Adapter is designed for quick attachment and detachment of various surface-mount devices onto a standard 35mm DIN rail. Four #8-32 mounting holes are located on the face of the Adapter support numerous models. The Adapter and grip plate are made of 20-gauge steel and assembled as one unit for durability. Constructed with two high-tension extension springs, the DRA-1 Adapter will securely fasten surface-mount enclosures to a standard 35mm DIN rail. The mounting hole pattern matches a standard Time Mark surface-mount enclosure. -
52901-02
The fuse block is designed to provide fuse protection for low current (<3 Amp) 600VAC devices. Time Mark fuse blocks will accept 20mm or 32mm ceramic fuses for maximum flexibility. The fuse block includes three 20mm 1A fuses installed plus two spare fuses (SKU: 520078). Time Mark fuse blocks are available with screw terminals (-01) or FASTON 0.187 terminals (-02). -
52901-01
The fuse block is designed to provide fuse protection for low current (<3 Amp) 600VAC devices. Time Mark fuse blocks will accept 20mm or 32mm ceramic fuses for maximum flexibility. The fuse block includes three 20mm 1A fuses installed plus two spare fuses (SKU: 520078). Time Mark fuse blocks are available with screw terminals (-01) or FASTON 0.187 terminals (-02). -
51X156
The Model 51X156 is a 12-pin heavy duty socket and can be used with Time MarkÕs models 261XBXP and 261XBXPR Alternating Relays.Pressure clamp screws are #6-32 Zinc plated steel with a wire range of #12 to #22 AWG. Contacts are nickel plated brass. This socked is rated up to 600VAC and is UL Recognized and CSA Certified.
-
51X120
The Model 51X120 8-Pin Socket can be surface or DIN-rail mounted and is suitable for use up to 600 VAC. The thermoplastic body can withstand up to 300 degrees F continuously without melting or electrical breakdown. Terminals are #6-32 screws. The one-piece, molded body does not require a separate insulator strip. (Also known as 51012001.)UL Recognized file number E-126447, CSA Certification file number LR-29513-27M and CE (European Conformity) Accepted.
-
51X016
The Model 51X016 11-Pin Socket can be surface or DIN-rail mounted and is suitable for use up to 300 VAC. The thermoplastic body can withstand temperatures up to 300 F continuously without melting or electrical breakdown. Terminals are #6-32 screws, and are suitable for use with wire sizes up to two #12 AWG. The one piece molded body does not require a separate insulator strip.The Model 51X016 is UL Recognized, CSA Certified, and CE (European Conformity) Accepted.
-
281-24DC
The Model 280 and 281 General Purpose Plug-In Relays are heavy duty, high quality relays available at a competitive price. UL Recognized and CSA approved, the Model 280 and 281 have a long life of over 10 million mechanical operations. Model 280 and 281 relays are available in a variety of AC and DC voltages. Mounting configurations are standard 8- and 11-pin. -
281-24AC
The Model 280 and 281 General Purpose Plug-In Relays are heavy duty, high quality relays available at a competitive price. UL Recognized and CSA approved, the Model 280 and 281 have a long life of over 10 million mechanical operations. Model 280 and 281 relays are available in a variety of AC and DC voltages. Mounting configurations are standard 8- and 11-pin.