• 388-Recycle-Timer---On-First

    388-H-1SEC

    Recycle Timer - On First
    1-1023 Sec.

    The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

    Models 358 and 388 are UL Recognized and CSA Certified.

    Select options
  • 388-Recycle-Timer---On-First

    388-L-0.1SEC

    Recycle Timer - On First
    0.1-102.3 Sec.

    The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

    Models 358 and 388 are UL Recognized and CSA Certified.

    Select options
  • 388-Recycle-Timer---On-First

    388-L-1MIN

    Recycle Timer - On First
    1-1023 Min.

    The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

    Models 358 and 388 are UL Recognized and CSA Certified.

    Select options
  • 388-Recycle-Timer---On-First

    388-L-1SEC

    Recycle Timer - On First
    1-1023 Sec.

    The Models 358 and 388 Recycle Timers (On Time First) are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model. The Model 358 is a DPDT potentiometer (knob-adjust) timer. The Model 388 is a DPDT, high-accuracy digital input timer. Solidstate circuits in each model drive an internal electromechanical relay. Each model is functionally interchangeable. They are available in a wide variety of voltage and timing ranges, to cover the majority of application requirements. An SG version of this model is available using silver with gold flash contacts.

    Models 358 and 388 are UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-H-10SEC

    Interval/Lockout Timer
    1 - 10 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-H-180SEC

    Interval/Lockout Timer
    1 - 180 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-H-300SEC

    Interval/Lockout Timer
    1 - 300 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-H-60SEC

    Interval/Lockout Timer
    1 - 60 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-L-10SEC

    Interval/Lockout Timer
    1 - 10 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-L-180SEC

    Interval/Lockout Timer
    1 - 180 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-L-300SEC

    Interval/Lockout Timer
    1 - 300 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options
  • 392-Interval-Lockout-Timer

    392-L-60SEC

    Interval/Lockout Timer
    1 - 60 Sec.

    The Model 392 Interval Lockout Timer is useful when you wish to de-energize the relay for a set period of time. Power is applied to the coil all the time. The Dry contact must close the initiate switch and re-open to energize the relay for the On time setting. At the end of the On time, the relay will de-energize and remain de-energized for the lockout time period. Closing and re-opening the initiate switch during the timing has no effect on the operation of the relay. At the end of the Lockout time the relay can be operated as before. An SG version of this model is available using silver with gold flash contacts.

    The Model 392 is UL Recognized and CSA Certified.

    Select options