Additional information
| Automatic Reset | |
|---|---|
| Certifications | |
| Contacts | SPDT |
| Manual Reset | No |
| Mount | Surface Mount |
| Phase Sensing | |
| Trip Delay | |
| Trip Restart | Fixed |
| Voltage Sensing | |
| Voltage Range |
A269
Categories: 269-Series, 3-Phase-MonitorsThe Model 269 Over and Under 3-Phase Monitor continuously monitors 3-phase lines for high voltage, low voltage, phase loss or phase reversal. This device features a solid-state voltage and phase-angle sensing circuit, which drives a SPDT output relay.
The Model 269 is independent of the system load, and may be used on any horsepower motor. When phase sequence is correct, and the voltage remains between the upper and lower trip points, the output relay remains energizes. When a fault condition is sensed, the output relay drops out.
The Model 269 does not require a neutral connection, and can be used on Wye or Delta systems. Each of the four voltage versions can be adjusted over a wide range. An adjustable trip delay (1-10 seconds) prevents nuisance tripping. OVER and UNDER voltage failure indicators aid in calibration and system troubleshooting.
Time Mark products are only sold through authorized Time Mark distributors. The “Buy Online” button will open a new browser window on Octopart.com and display Time Mark distributors that sell your desired product.
If Octopart does not currently display the Time Mark product you desire, please call us Toll-Free at (800) 862-2875 or use the Find a Distributor link on our website to find a distributor near you.
If Octopart does not currently display the Time Mark product you desire, please call us Toll-Free at (800) 862-2875 or use the Find a Distributor link on our website to find a distributor near you.
